Bryce 9K-L Especificaciones descargar pdf (Pagina 52)

Printer Menu System

• Press the + or - buttons to scroll through the options

of ON or OFF.

• Press the Enter button to select the desired option.

• Press the Menu button several times to back out of the

Setup Menu until the printer displays OFF LINE.

• Press the On Line button; now the printer is ready for

use.

Before using this option, verify the media is loaded in the

input bin so a test pattern can be printed. A diagonal line will

print across the media. If a gap is present within the diagonal

line, one or more nozzles of the ink jet cartridge maybe

blocked and need to be cleaned. Clean the ink jet cartridge by

performing a purge (see menu option below). If the purge does

not clear the nozzles, then remove the Ink Jet Cartridge. See

chapter 4 on how to remove and install an ink jet cartridge.

Clean the nozzles with a dry soft cotton cloth or one

moistened with water.

2. TEST PRINT

HEAD

Use the following steps to test the ink jet cartridge.

• Press the + or - buttons to scroll through the Setup

Menu options until the 2. TEST PRINT HEAD option

is displayed on the LCD panel.

• Press the Enter button to select this option.

• The LCD will display Print a test pattern? Press the +

(YES) button to print the test pattern or press the -

(NO) button to disable this option.

• Press the Enter button to select the desired option.

• Press the Menu button several times to back out of the

Setup Menu until the printer displays OFF LINE.

• Press the On Line button; now the printer is ready for

use.

The purge process fires all the ink jet nozzles to dislodge and

clear any dried ink on the print nozzles. Often this will return

the print quality to a normal level.

3. PURGE PRINT

HEAD

Revision A 9K-L USERS MANUAL Section 6 -

P/N 90-00860-001

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 150 151

Sin comentarios

Bryce 9K-L Especificaciones Pagina 52